EWEA Offshore 2011 - REpower installs 6M wind turbines in Eemshaven

Hamburg / Amsterdam - At the beginning of the EWEA Offshore exhibition in Amsterdam, REpower Systems SE and RWE Innogy have concluded a contract for the delivery of two REpower 6M wind turbines.

The turbines, each with a rated power of 6.15 MW and a hub height of 114 metres, will be installed in the Westereems wind farm near Eemshaven in the Dutch province of Gronigen. Eemshaven is only a few kilometres from the German border, directly on the Ems estuary and south of the island of Borkum. With a current installed power of 156 MW, Westereems is already the largest wind farm in the Netherlands and will now be extended with a further 12.3 MW, and, for the first time, REpower turbines at this location. As well as the delivery and construction of the wind turbines, the turnkey project also involves the manufacturing of the foundations. Completion is already planned for mid 2012.

The two 6M turbines correspond to the type which RWE Innogy is shortly going to use in the offshore wind farm North Sea East.

"The two 6M turbines are an ideal expansion of the existing wind farm Westereems. Furthermore, with operation of the plants we aim at gaining new insights for their employment on the high seas in the project Nordsee Ost", explains Prof. Martin Skiba, Head of Offshore Windenergy at RWE Innogy.

Installation of the wind farm Nordsee Ost, some 30 kilometres North of Helgoland, is to be started in spring 2012. In total, 48 turbines of the 6M type will be used there. REpower is currently working on the production of the wind turbines at the company's offshore production location in Bremerhaven. Production is currently on schedule, the turbines are due to be delivered in the course of 2012.

REpower is present with its offshore product portfolio in Amsterdam for EWEA Offshore at its trade fair stand from 29 November to 1 December 2011 in hall 10, stand 10230. EWEA Offshore is the world's largest trade fair and conference for offshore wind power. Over 460 exhibitors are represented over an area of 8,000 square metres and over 7,500 visitors are expected.

Similar Entries

Webinar "Operation of Wind Power Plants in Cold Climate 2021" (pict. VGB)

For the first time the results of the VGB Research Project “Comparison of blade-based ice detection systems” will be presented at the webinar
"Operation of Wind Power Plants in Cold Climate".

Sometimes one and one add up to more than the mere addition of numbers. Structural Health Monitoring (SHM) of rotor blades is a complex and demanding task that requires very good hardware as well as professional data analysis in order to be able to make really precise and early statements about structural damage to the rotor blade. For this reason, two specialists have now joined forces to offer wind farm operators the best possible combination of forces on the market.

Using Bolt-Check to monitor clamp load (pict.: R&D A/S)

The Bolt-Check tool reduces preventative maintenance time, resulting in service cost reductions while maximizing uptime; Reduced health and safety costs.

This installation will allow the farm in South Africa to lower the purchase of external energy, obtaining up to  80% of energy self-reliance as well as 70% energy self-consumption, that means 712 kWh of electricity produced daily vs. 895 kWh consumed (pict. Fimer)

All Electrical Distributors has chosen FIMER’s PVS-100-TL to help South African dairy farm run on 70% of its own energy.